Nano-capillary electrophoresis for environmental analysis

Many analytical techniques have been used to monitor environmental pollutants. But most techniques are not capable to detect pollutants at nanogram levels. Hence, under such conditions, absence of pollutants is often assumed, whereas pollutants are in fact present at low but undetectable concentrations. Detection at low levels may be done by nano-capillary electrophoresis, also named microchip electrophoresis. Here, we review the analysis of pollutants by nano-capillary electrophoresis. We present instrumentations, applications, optimizations and separation mechanisms. We discuss the analysis of metal ions, pesticides, polycyclic aromatic hydrocarbons, explosives, viruses, bacteria and other contaminants. Detectors include ultraviolet–visible, fluorescent, conductivity, atomic absorption spectroscopy, refractive index, atomic fluorescence spectrometry, atomic emission spectroscopy, inductively coupled plasma, inductively coupled plasma–mass spectrometry, mass spectrometry, time-of-flight mass spectrometry and nuclear magnetic resonance. Detection limits ranged from nanogram to picogram levels.     

Methane production from anaerobic digestion of date palm leaflet waste in Morocco

Journal of Material Cycles and Waste Management - The recovery of date palm leaflet waste (DPLW), generated by palms through anaerobic digestion (AD) technology, attracts more attention...     

Correlations between speciation of Cd,Cu, Pb And Zn in sediment and their concentrations in total soft tissue of green-lipped mussel Perna viridis from the west coast of Peninsular Malaysia

Total concentrations and speciation of cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn) in surface sediment samples were correlated with the respective metal measured in the total soft tissue of the green-lipped mussel Perna viridis, collected from water off the west coast of Peninsular Malaysia. The aim of this study is to relate the possible differences in the accumulation patterns of the heavy metals in P. viridis to those in the surface sediment. The sequential extraction technique was employed to fractionate the sediment into 'freely leachable and exchangeable' (EFLE), 'acid-reducible,' 'oxidisable-organic' and 'resistant' fractions. The results showed that significant (P<.05) correlations were observed between Cd in P. viridis and Cd in the sediment (EFLE fraction and total Cd), Cu in P viridis and Cu in the sediment (EFLE and 'acid-reducible' fractions and total Cu) and Pb in P viridis and Pb in the sediment ('oxidisable-organic' fraction and total Pb). No significant correlation (P > .05) was found between Zn in P viridis and all the sediment geochemical fractions of Zn and total Zn in the sediment. This indicated that Zn was possibly regulated from the soft tissue of P. viridis. The present results supported the use of P viridis as a suitable biomonitoring agent for Cd, Cu and Pb.     

Investigation of soil multi-element composition in Antalya,Turkey

The chemical composition of 73 surface soil samples collected at the city of Antalya were analyzed for major, minor and trace elements to assess distribution of soil pollution, due to deposition of pollution-derived particles from the atmosphere. Comparison with data from rural area and distribution maps demonstrated that the composition of soil by metals is not significantly modified by anthropogenic activities in most of the city and its surroundings. In these areas, observed concentrations can be largely accounted for by occurrence of elements in aluminasilicate matrix of soil. However, soil composition is altered substantially close to major industries and at the settlement districts. In such limited areas, concentrations of anthropogenic elements such as Cd, Pb, Zn, Cu and Cr are factors of 20-50 higher than their concentrations in unperturbed soil. Factor analysis revealed three groups of elements that differ in their distributions. One of these components is unperturbed soil component, which is distributed uniformly in the study area; the second one is polluted soil, which is mostly confined to settlement areas and around industries; and the third is a mixed marine and motor vehicle impacted soil component, which occurred at the coastal parts of the city.     

Fabrication Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method

This paper mainly focuses on the fabrication process of long fibre reinforced unidirectional thermoplastic composites made using both natural (untreated) treated jute yarns. Jute yarns were wound in layers onto a metallic frame. Polypropylene films were inserted between these layers and compression moulded to fabricate unidirectional jute/PP composite specimens. Static mechanical properties were evaluated from tensile three point bending tests. Pre- post-failure examination were carried out on the test specimens using optical scanning electron microscopy to analyse the test results and investigate the correlations between their impregnation state, processing conditions, mechanical performances and fracture morphologies. For the unidirectional jute/PP film-stacked composites, the results indicated that the processing condition at the moulding temperature of 160°C and moulding pressure of 2.0 MPa for 15 min was ideally suited to obtain optimized properties. Improved wettability of resin melts due to complete matrix fusion at this processing condition facilitated thorough impregnation with minimum microstructural imperfections (microvoids) being generated. Jute/PP composites that contained treated jute yarns have shown superiority in tensile bending properties. Jute yarns polished or coated with PVA/PP (polyvinyl alcohol/polypropylene) must have contributed positively to fibre/matrix interfacial interactions leading to matrix to fibre effective stress transfer, thereby improving their reinforcing effects. Tensile strength and modulus of PP resin increased by approximately 285% and 388%, respectively, due to 50 wt% reinforcement by natural jute yarns. Further improvements in strength and modulus were achieved by approximately 14% and 10%, respectively, when treated yarns were used . The maximum bending stress modulus of jute/PP composites containing untreated yarns were approximately 190% and 460% higher than those of the virgin PP materials, and bending properties were improved by further 11% and 23%, respectively, due to coating treatments on the yarn surface.     

Capturing the dynamics of leader–follower interactions: Stalemates and future theoretical progress

Despite being based on the premise of a dynamic interpersonal process, studies on leader–member exchange theory often fail to acknowledge its dyadic and dynamic nature. We discuss how the interpersonal affect dynamics literature—and particularly its focus on the emergence of relationship patterns—may advance research on leader–follower interactions.     

The investigation of metal concentrations in street dust samples in Aqaba city,Jordan

The concentrations of metals (Fe, Zn, Cu, Cr, Pb, Cd, Ni, Mn and Co) in 140 street dust samples were collected from Aqaba city, Jordan. These samples were determined using flame atomic absorption spectrophotometry after digestion with aqua regia. The highest levels of metal concentrations were found in the samples from heavy traffic. While the lowest levels of metal ions were noted in the street dust samples from hospital and health centers and school gardens. The results of this study were compared with several cities around the world. The levels of the metal concentrations found were generally below the mean world-wide values of street dust samples. Metal values in urban street dust samples were several times higher than the control levels. The statistical analyses were applied to the data matrix to determine the analytical results and to identify the possible source of pollution in the studied area. Correlations between the metal concentrations of the street dust samples were obtained. Factor analysis showed that the area was mainly influenced by three sources, namely lithogenic, traffic, and industrial.     

Latitudinal gradients in species richness for South American Mytilidae and Ostreidae: can alternative hypotheses be evaluated by a correlative approach?

We tested to what extent mean sea surface temperature, geometric constraints in range size frequency distributions (the mid-domain effect) and geographical coastline distance to the equator are related to species richness of coastal Mytilidae and Ostreidae in the Pacific and Atlantic coasts of South America (excluding islands). The location and magnitude of the peaks in species richness, as well as the shape of the pattern, varied between oceans. Results were not biased by spatial autocorrelation, although strong multicollinearity among predictor variables was detected. However, these regional-extent regression models suggest differences in the causal factors that explain richness gradients of studied bivalves in South American coasts, most likely related to historical events such as the Southeastern Pacific Pleistocene mass extinction of bivalves. Our results reinforced the conclusion that there is no single best explanatory cause for the latitudinal gradient in species richness and showed that the correlative approach is not useful when predictor variables are strongly correlated.     

An assessment of the concentrations of particulate polycyclic aromatic hydrocarbons (PAHs) in the aftermath of a chemical store fire incident

PM10 airborne particles and soot deposit collected after a fire incident at a chemical store were analyzed in order to determine the concentrations of polycyclic aromatic hydrocarbons(PAHs). The samples were extracted with 1 : 1 hexane-dichloromethane by ultrasonic agitation. The extracts were then subjected to gas chromatography-mass spectrometric(GC-MS) analysis. The total PAHs concentrations in airborne particles and soot deposit were found to be 3.27 1.55 ng/m^3 and 12.81 24.37 μg/g, respectively. Based on the molecular distributions of PAHs and the interpretation of their diagnostic ratios such as PHEN/(PHEN ANTH), FLT/(FLT PYR) and BeP/(BeP BaP), PAHs in both airborne particles and soot deposit may be inferred to be from the same source. The difference in the value of IP/(IP BgP) for these samples indicated that benzo[ g, h, i] perylene and coronene tend to be attached to finer particles and reside in the air for longer periods. Comparison between the molecular distributions of PAHs and their diagnostic ratios observed in the current study with those reported for urban atmospheric and roadside soil particles revealed that they are of different sources.     

Recognizing reflexivity among conservation practitioners

When deciding how to conserve biodiversity, practitioners navigate diverse missions, sometimes conflicting approaches, and uncertain trade-offs. These choices are based not only on evidence, funders’ priorities, stakeholders’ interests, and policies, but also on practitioners’ personal experiences, backgrounds, and values. Calls for greater reflexivity—an individual or group's ability to examine themselves in relation to their actions and interactions with others—have appeared in the conservation science literature. But what role does reflexivity play in conservation practice? We explored how self-reflection can shape how individuals and groups conserve nature. To provide examples of reflexivity in conservation practice, we conducted a year-long series of workshop discussions and online exchanges. During these, we examined cases from the peer-reviewed and gray literature, our own experiences, and conversations with 10 experts. Reflexivity among practitioners spanned individual and collective levels and informal and formal settings. Reflexivity also encompassed diverse themes, including practitioners’ values, emotional struggles, social identities, training, cultural backgrounds, and experiences of success and failure. Reflexive processes also have limitations, dangers, and costs. Informal and institutionalized reflexivity requires allocation of limited time and resources, can be hard to put into practice, and alone cannot solve conservation challenges. Yet, when intentionally undertaken, reflexive processes might be integrated into adaptive management cycles at multiple points, helping conservation practitioners better reach their goals. Reflexivity could also play a more transformative role in conservation by motivating practitioners to reevaluate their goals and methods entirely. Reflexivity might help the conservation movement imagine and thus work toward a better world for wildlife, people, and the conservation sector itself.